ITG's AH4018 Series is a Ferrite Based SMD Inductor that offers advantages such as Lower Core Losses, Lower Profile at 5mm max height, and is ideal for Buck Conversion, VRM and High Density Board Design.

 AH4018_Rev A.pdf

SMD Spring Air Coil (AK1812 Series). SMD Air Coil for RF application.

 AK1812.pdf

AP Series
Through-Hole Custom Toroid Choke

For equipment using thyristor such as SCR triac, etc. (* Speed Control, * Heating Control, * Lighting Control)

Prevention of switching power supply input/output EMI/RFI

For countermeasures against spike noise of DC circuit of switching power supply.

Compact size high performance low cost.

Withstands large current loads.

Low leakage and minimal acoustic noise

Custom designs are welcomed!

 AP_SERIES.PDF

SMD Power Inductor for Mhz application. 7.7x6.0x3.6mm package high current inductor design with gapped ferrite core optimized for 300Khz to 3Mhz application. Feature edge wound wire for low profile and low DCR offering. Compact design saving board space ideally for high density DC to DC converter application.
 AQ3013-1R5M.pdf

SMD Power Inductor for Mhz application 9.4x7.2x5.5mm package high current inductors design with gapped ferrite core optimized for 300Khz to 3Mhz application. Feature edge wound wire for low profile and low DCR offering. Inductance range from 0.75µH to 12µH, rated current 14 Amp to 6 Amp. Compact design saving board space ideally for high density DC to DC converter application.

 AQ4024_Series_Rev B_070906.pdf

SMD Power Inductor for Mhz application 9.4x7.2x5.5mm package high current inductors design with gapped ferrite core optimized for 300Khz to 3Mhz application. Feature edge wound wire for low profile and low DCR offering. Inductance range from 0.75µH to 12µH, rated current 14 Amp to 6 Amp. Compact design saving board space ideally for high density DC to DC converter application.

 AQ4024_Series_Rev B_070906.pdf

SMD Power Inductor for Mhz application 13x10.2x4.5mm package high current inductors design with gapped ferrite core optimized for 300Khz to 2Mhz application. Feature edge wound wire for low profile and low DCR offering. Inductance range from 0.22µH to 10µH, rated current 45 Amp to 7 Amp. Compact design saving board space ideally for high density DC to DC converter application.

 AQ50XX Series Rev E.pdf

SMD Balun Common Mode Choke for IEEE1394 Application. Low profile: 3.8mm(Max). Common mode impedance of 220W at 100MHz, 420W at 400MHz. Operating temperature range: -20°C~+80°C. Suitable for reflow soldering. Withstand Voltage: 100VDC. Custom winding configuration are welcome.

 B1394A.pdf

Balun Common Choke. Low profile: 2.3mm(Max) with ceramic base. Common mode impedance of 370O at 1MHz ,11000 at 10MHz. Operating temperature Range:-20º~ +80? Suitable for reflow soldering.

 BALUN_COMMON_CHOKE.PDF