0.47µH, 38 Amp 1.1mOhm, SMD High Current Power Inductor.
Compact Size in 13.2x12.9mm foot print, 5.0mm max. height.
250 pcs per reel
Rohs Compliance Component

 SM5018-R47M_RevA.pdf

0.44µH, 44 Amp 0.6mOhm, SMD High Current Power Inductor.
Compact Size in 14.3x12.6mm foot print, 6.0mm max. height.
250 pcs per reel
Rohs Compliance Component

 SM5024-R45MU_RevA.pdf

UL, CSA and VDE approved In-Rush Current Limiter NTC in 8mm, 10mm, 13mm, 15mm, 20mm and 25mm Disc Size. Up to 15 Amp rated Current.
 SP_07.pdf

SQ Series SMD High Current Inductor. 0.50'' package SMD inductor. Compatible foot print to Sumida & Toko equivalent. Ideally for DC to DC converter. VRM & high density board design. Low leakage flux, shielded inductor design. Low profile. Operating temperature: -400 to 1500 C. Suitable for IR reflow and wave solder process Inductance (uH), 300KHz, 0.25V
 SQ_Series_RevB_030109_pdf.pdf

SMD Current Sense Transformer

FEATURES

Rohs Compliance Component

Small Size, Low Profile 5mm Height

Full Selection of turns ratios

Primary rated for 20 amps AC rms

Hi-Pot: 500 Vrms

Available in T&R for SMD Assembly; 900 pcs /reel

APPLICATIONS

Current sensing for feedback control

Overload or load drop sensing

Ideal for high density DC-DC converter application

 SMD_20AMP_CURRENT_SENSE_TRANSFORMER-ROHS.PDF

SMD Current Sense Transformer

FEATURES

Small Size, Low Profile 5mm Height

Full Selection of turns ratios

Primary rated for 20 amps AC rms

Hi-Pot: 500 Vrms

Available in T&R for SMD Assembly; 900 pcs /reel

APPLICATIONS

Current sensing for feedback control

Overload or load drop sensing

Ideal for high density DC-DC converter application

 SMD_20AMP_CURRENT_SENSE_TRANSFORMER.PDF

7mm, 10mm, 14 and 25mm Disc size MOVs available Variestor Voltage rating from 18V to 110VDC. AC rating up to 680VAC

 V_07.pdf

Film and foil capacitors with mixed dielectric for pulse applications in PCM 5 mm.
Reservoir and decoupling capacitors for highspeed digital circuits.
Low induction and low damping, with almost linear capacitance temperature coefficient.
Available taped and reeled.

Special Features

Pulse duty construction

Constant capacitance value versus temperature (similar to the obsolete Polycarbonate)

Low dissipation factor

According to RoHS 2002/95/EC

Typical Applications:
For general DC-applications requiring a high
capacitance stability versus temperature e.g.

Automotive electronics

Lighting

 WIMA_FKM_2.pdf

Film and Foil Capacitors with Mixed Dielectric for Pulse Applications PCM 7.5 mm to 15 mm. Reservoir and decoupling capacitors for highspeed digital circuits. Low induction and low damping, with almost linear capacitance temperature coefficient. Available taped and reeled.

Special Features

Pulse duty construction

Constant capacitance value versus temperature (similar to the obsolete Polycarbonate)

Low dissipation factor

According to RoHS 2002/95/EC

Typical Applications
For general DC-applications requiring a high capacitance stability versus temperature e.g.

Automotive electronics

Lightning

 WIMA_FKM_3.pdf

Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, Double-Sided Metallization and Self-Healing Internal Series Connection for Highest Current Carrying Capacity PCM 15 mm to 37.5 mm

Special Features

Extremely high pulse duty

Self-healing

Internal series connection

Very low dissipation factor

Negative capacitance change versus temperature

According to RoHS 2002/95/EC

Typical Applications
For high pulse and high frequency applications e.g.

Switch mode power supplies

Converters in drives and power electronics

Deflection systems in monitors and TV-sets

Electronic ballasts

 WIMA_FKP_1.pdf