PQ87xx Series. Planar design high current chokes. Low profile. High flux material for graduate DC bias roll off performance. Custom values in ferrite base material are available upon request. Working frequency up to 600KHz. Operating temperature range 400 C to +1500 C . Coplanarity: 0.1mm
 PQ87XX_SERIES.PDF

PQ87xx Series. Planar design high current chokes. Low profile. High flux material for graduate DC bias roll off performance. Custom values in ferrite base material are available upon request. Working frequency up to 600KHz. Operating temperature range 400 C to +1500 C . Coplanarity: 0.1mm
 PQ87XX_SERIES.PDF

A Comprehensive Guide to help design engineer select core material for his/her custom magnetics design
 Powder Cores Selection Guide_100301.pdf

Power Puck Inductor
Features:

Compact design, save space

Excellent DC Bias performance

Inductance range; 50 uH to 1000uH

Operating temperature range: -40 - + 150C

Custom designs are welcome
 Power Puck Inductor Series_Rev G_Specs_091223.pdf

SC2511 Series SMD High Current Inductor is our New and Improved 0.25"" package.
This inductor offers a smaller package size 6.8x6.8mm (vs. 7.2x6.6mm)", Lower Profile 3mm Max. (vs. 3.4mm max.) and Improved Co-planarity....... Ideally for DC to DC converter, VRM & high density board design. Operating up to 3 MHz application. Operating temperature: -400 to 150 Degree C.
Suitable for IR reflow and wave solder process.

 SC2511_SERIES.PDF

Our new SC251x product family is an expansion of our 0.25"""" foot print SMD power inductor; SC2511 Series is 3mm height max. and 4mm height max. for SC2515 Series. The additional height of SC2515 gives more space to incorporate more copper into the component...as a result lower DCR""", more efficient, higher current rating. Please refer to the spec. of SC2511-R47M 1R0 and 1R5M to compare with SC2515-R47M," 1R0 and 1R5M to see the difference.

If your application only allow 0.25"" board space and does have extra 1mm height", please take advantage of higher current handling capability of SC2515 Series

 SC2515_Series_Rev E_070907.pdf

Our new SC251x product family is an expansion of our 0.25"" foot print SMD power inductor; SC2511 Series is 3mm height max. and 4mm height max. for SC2515 Series. The additional height of SC2515 gives more space to incorporate more copper into the component...as a result lower DCR", more efficient, higher current rating. Please refer to the spec. of SC2511-R47M 1R0 and 1R5M to compare with SC2515-R47M," 1R0 and 1R5M to see the difference.

If your application only allow 0.25"" board space and does have extra 1mm height", please take advantage of higher current handling capability of SC2515 Series

 SC2515_SERIES.PDF

Features:

0.30"""" Foot Print SMD High Current Inductor

Low profile - 5.4 mm Max. Height

Ideal for DC to DC converter. VRM & high density board design

Low leakage flux""", shielded inductor design

Suitable for IR reflow and wave solder process

Tape & Reel Quantity - 700 pcs
 SC3020_Series_Rev A_070907.pdf

Features:
● 0.40"" package SMD Power Inductor
● Ideal for DC to DC converter and high density board
● Operating up to 3 MHz application
● Low leakage flux
● Low profile 3.6 to 5.0 mm max
● Operating temperature: -40ºC to 150ºC
● Suitable for IR reflow and wave solder process
● Lead Free components are available upon request
 SC40XX_SERIES.PDF